So, we can write a script to do so. We will see how to do so. So, the first thing that we need to do is to download the firmware of the device. So, we will get it from the official site of the company. After that, we need to flash it to the device. So, we will get it from the site. After that, we need to configure the device. So, we will get it from the site. After that, we need to connect the device to the router. So, we will get it from the router. After that, we need to ping the device. So, we will get it from the router. After that, we need to make a DHCP server. So, we will get it from the router. After that, we need to make a DHCP client. So, we will get it from the router. After that, we need to make a TFTP server. So, we will get it from the router. After that, we need to make a TFTP client. So, we will get it from the router. After that, we need to make a DNS server. So, we will get it from the router. After that, we need to make a DNS client. So, we will get it from the router. After that, we need to make a NTP server. So, we will get it from the router. After that, we need to make a NTP client. So

Install the ntlm-auth package

The ntlm-auth package can be installed with the following command:
apt -y install ntlm-auth
This will install the ntlm-auth package. This can also be installed on Debian and Ubuntu Linux.

How to set up a router as a base station?

So, let's start with the first step. We will need to connect the router to the power supply. So, we will get it from the site. After that, we will need to plug in a LAN cable on the port where there is an Internet and a LAN cable on the port where there is an Ethernet. So, we will get it from the site. After that, we will need to go into another tab in our browser and type in 192.168.1.1 as a default gateway and then press enter. So, we will get it from the site. After that, we will click 'Start'. We can also do this by pressing enter at the same time of typing in 192.168.1.1 which would load up our router setup screen when opening a new tab in our browser and then clicking 'Start'.

List of tools we need to use

- Raspberry Pi 3
- UART connection
- USB to serial bridge (EXAMPLE: FTDI cable)
- Flash drive with firmware files
- Router and static IP address
- DHCP server
- DHCP client
- TFTP server
- TFTP client

So, we can write a script to do so. We will see how to do so. So, the first thing that we need to do is to download the firmware of the device. So, we will get it from the official site of the company. After that, we need to flash it to the device. So, we will get it from the site. After that, we need to configure the device. So, we will get it from the site. After that, we need to connect the device to the router. So, we will get it from the router. After that, we need to ping the device. So, we will get it from the router. After that, we need to make a DHCP server. So, we will get it from the router. After that, we need to make a DHCP client. So, we will get it from the router. After that, we need to make a TFTP server. So, we will get it from the router. After that, we need to make a TFTP client. So, we will get it from the router

How to Install Synology Router Firmware in VMware Virtual Machine?

Step 1: Open VMware Workstation 12.5.1
Step 2: Create a new virtual machine
Step 3: Import the .iso of your router from the Synology website
Step 4: Install the image to the new VM
Step 5: Connect to the VM and configure it

Timeline

Published on: 08/31/2022 23:15:00 UTC
Last modified on: 09/02/2022 21:55:00 UTC

References